No there called
tech screw
For cladding
They will screw straight into the bongo metal work

http://www.ebay.co.uk/itm/Tek-Screws-Se ... hcwtdiP6eg

Check the size

The piprwork is a 5 min job
It's finding suitable brackets that's the hard bit
You need two different handed right angle brackets

Think the big self taping bolt / screws are called tektight
It just came to me

[quote="Merlot man"]Hello Gasy
Thanks for the that , what your saying also makes sence ,


That's a first for me

It's a s shaped hose at the bottom of existing rad
About 10mm
And it's on the drivers side of the existing rad at the bottom

Just one hose is disturb / cut
I'm running it in parrallel with the existing one
So atf fluid comes out of box goes through existing rad and then through new 13 row rad and then back to gear box

I found one that was full of bread one morning
I must be lucky
Lucky I did as the shop had no bread when I got home that night

I beleave it should be put on the return from the existing rad
Which is the drivers side of existing rad at the bottom

I know my explanation is hard to understand Basically you have to cut / disconnect the small rubber hose from the. Bottom left of the existing/cooling rad at front of vehicle This hose contains auto box fluid And conect that hose to your new 13 row rad Top up fluid it don't take a lot Job done Harde...

Bit of a write up on here
http://igmaynard.co.uk/bongo/forum/view ... =3&t=73530

It's an easy job
I did a write up a few days back and a link to eblay advert will try to find it

I used the bread baskets which are left outside the shops at night for the early morning lorry delivery
They fit perfectly and can be tie wrapped to underneath the seats so they slide with the seats
Some of the shops do black ones now
And there free if your up early enough

Bugger I've just checked mine
And I got caught
Time to grow a beard and completely deny it was me
Clocked number plate your honour

Are you in eye in Cambridgeshire eye guy
If so I'm only up the road

There the little pipe that connected to the big air pipe you replaced
There's a few others around the engine

No I woundt accept it