Trouble is that it is a slow degridation of the component rubber between the cone and the outer rim, i just noticed one day that my front speakers sounded poo.

Thanks for the info ,will be nice to finally meet you,if we see you that is?daft question ,but is there a shower block there or is a bit of a hike? :D Its a beautiful site, yes there's a shower block and yes you have to walk to it but its by no means a hike, i did a sat sun mon last year and didn't...

That'll be Martin Jackson at Huntingdon coachworks, warboys airfield ind est PE28 2SH, 01487 824808.

After loosing a set of JBL'S to tight spacing behind the door cards i have mounted my new speakers in my custom trim plates, sound is sooooo much better. http://i856.photobucket.com/albums/ab126/soopacoupe/100_3586_zpsfa240ad6.jpg found this little critter when i took the A pillar trim off to fit my...

Nice one LB5 happy bongoing

Are you using supermarket fuel ? Is there a loss of power ?

teenmal wrote:

M 80NGO wrote:Don't know why you didn't phone me and save yaself some £££££ cold start idle adjustment is easy peasy

Maybe this is why,...............Just spent £750 on the fuel pump and service this time ..........

yeah, maybe

Got all the hall marks of the camshaft oil seal like mine had, £3 for the seal and about £200 of labour, get the cambelt changed at the same time

Don't know why you didn't phone me and save yaself some £££££ cold start idle adjustment is easy peasy

Yep that's the one, last page is where it all becomes clear

Cold start idle screw needs adjusting, 10 min job with a 10mm spanner and a flat blade screw driver, do a search on Barack Obama and all will become clear, if you pm me I'll forward you my number and talk you through it .

Great lill meet with great people and a lill Bongvoy home with patrick, Sunday's don't get much better than that

I say strip it down keep or sell all the good bits, cut the front end off and make a carongo, a caravan out of a bongo

Also by using 3mm mdf it stops the new speaker grills from fouling the door card recess

Looks a tidy installation... 8) I'm pleased with it, the problem is when you pull the grills off it leaves 3 unsightly holes, so with the door panels off i drew around the grills onto 3mm mdf cut them out with the jigsaw then held them in place and drew the speaker cut out from the inside drilled a...