Search found 110 matches
- Thu Jul 20, 2006 10:18 am
- Forum: Techie Stuff
- Topic: how does my air con / climate control work ??
- Replies: 10
- Views: 4066
If you have an electronic temperature readout then there is no linkage, all shutters are electrically operated. 18 degrees is more than enough to keep you cold and in this weather you may not be able to reduce the outside temperature by more than 10 or 12 degrees so it's best to use the recirculatio...
- Thu Jul 20, 2006 3:50 am
- Forum: Techie Stuff
- Topic: Speedo - is this a problem?
- Replies: 22
- Views: 6982
Bonza, Don't waste your money on a new speed converter. This is a simple frequency converter and will almost certainly not have an intermittent fault, either it works or it doesn't work, you could probably make one for about 50p and a soldering iron. The input signal is quite a low voltage square wa...
- Wed Jul 19, 2006 11:14 pm
- Forum: Techie Stuff
- Topic: Bongo towing in the heat
- Replies: 8
- Views: 3738
Bongo Towing.
:lol: :lol: :lol: On Tuesday of this week, We travelled back from Fort William - Scotland, to Essex, a total of some 520 miles. The air temperature in Scotland was around 28 degrees and well above 30 degrees in England. We Left Fort William at 10:30 and arrived home at 21:01 with 48 minutes stop for...
- Thu Jul 06, 2006 9:00 pm
- Forum: Techie Stuff
- Topic: Squeaks at the rear - Not the front as previously suspected!
- Replies: 7
- Views: 2673
Squeeky noises.
I bought a Bongo about 4 years ago and after a couple of months it developed very similar symptoms. I suspected dry CV joints and as a temporary cure I injected some engine oil through the gaiter with a hypo syringe, after 10 or 20 miles it almost disappeared. Finally got local mech man to repack th...
- Wed Jun 28, 2006 1:23 pm
- Forum: Techie Stuff
- Topic: Wiring a Radio
- Replies: 2
- Views: 1756
Speakers
As far as the speakers are concerned there is no such thing as pos or neg as the signals are AC. what is more important is that they all are synchronised to acheive maximum base response. Use a 1.5 volt battery straight across each pair which will cause each speaker to click, label each pair as you ...