Hi guys i`ve been a little worried by my masons high needle position although the alarm has never beeped. Last monday i was booting it along a dual carriageway for a good 20 mins and the needle started to rise and the alarm beeped once. When i backed off to 65 needle went back to its normal position...

Maybe a silly question but has anybody tried fitting the 16inch Galaxy wheel onto a bongo. I know they are 98 load rated but not sure about studs or offsets.

Just saw this not sure where we should be as we`re north of Peterborough just over the lincolnshire border. Anyway Hi

It will be our first meet up, only a few miles away see you all there.

Just checked and mine are just as quick and its -2 and snowing

Is the heater inlet different in diesels as i have a large flatish air intake for the heater at the top of the radiator and the engine intake behind the battery?

I run the Acceleras 215 x65x15 and run them at 34 psi seems ok to me. Bongo is 2.5 tin top.

Hi Dave, If i recall the split charger in mine works by sensing when the starter battery is being charged or around 14 volts it then triggers the relay and current flows to the leisure battery. If the relay senses a drop in current ie. engine stop it closes and prevents the lower charged battery dra...

Hi, I know from my caravan days that the 100amp leisure is a monster not sure if it would fit in a bongo. My leisure battery is an 85 i think and that just fits the battery tray. I will check in the morning and post a reply. I havent checked the other (starter battery) but it is a bit bigger than th...

Hi Briwy it may be a bad earth, mine was, and its a very simple fix. If you have access to the factsheets the details are on there. Basically after 15 years the earth on the tank can become erratic and it needs to be fixed. A case of cleaning around one of the screws on the top of the tank and conne...

Got the old resistor back from the lads at work and it works on all speeds so thanks again to your suggestions the fact sheets and this forum.

Hi guys yep loads of orangy gunk thankfully the bushes were ok. I have taken the old resistor to work to see if they can solder it they said they could so will use the old one and keep the new one in the van as a spare as you suggest.

I`ve just stripped the fan and un-seized it, just waiting for new fan resistor. Didnt think about the fact sheets.Off to have a look now

Just done my oil change and castrol magnatec 5 -30 fully synth is only 25 quid for 4 litres at the moment if it helps anybody.