Search found 395 matches
- Sun Apr 14, 2019 8:41 pm
- Forum: Techie Stuff
- Topic: Rear AC EVAPORATOR
- Replies: 13
- Views: 4134
Re: Rear AC EVAPORATOR DELETE
If you have an air con leak there are a couple of other options. A good TIG welder can fix things, there are kits to replace sections of pipe (usually very pretty, anodised stuff) or what we had done to fix a pin hole leak - took it to a specialist who cut the pipe and then join it with a larger pip...
- Wed Apr 10, 2019 8:42 pm
- Forum: Bargains!
- Topic: 5w40 TripleQX FULL SYNTH £14.99 for 5L
- Replies: 3
- Views: 4058
Re: 5w40 TripleQX FULL SYNTH £14.99 for 5L
I've used it in the past and not had problems (although you can never really tell what oil gets up to as it lurks around inside the engine)
- Wed Apr 10, 2019 8:35 pm
- Forum: Techie Stuff
- Topic: Rear AC EVAPORATOR
- Replies: 13
- Views: 4134
Re: Rear AC EVAPORATOR DELETE
Yep - you can just blank them off, people do this usually under the passenger seat.
Mazda themselves would blank them off on Bongo's without rear air con.
I've seen pictures where the pipes are cut and then folded over 2-3 times to seal.
Mazda themselves would blank them off on Bongo's without rear air con.
I've seen pictures where the pipes are cut and then folded over 2-3 times to seal.
- Tue Apr 09, 2019 5:07 pm
- Forum: Bongo Chat
- Topic: I bought the Bongo!
- Replies: 8
- Views: 2674
Re: I bought the Bongo!
Perhaps the single most important thing to do is fit a low coolant alarm. A further good purchase in terms of bang for buck are rear air lift suspension - about £110. Security is important and the aforementioned steering locks are great. The disc lock from Halford's at £50 work's well in it's mildly...
- Mon Apr 08, 2019 2:39 pm
- Forum: Techie Stuff
- Topic: Hold function on auto box not working
- Replies: 4
- Views: 2338
Re: Hold function on auto box not working
<t>Hold function is back.<br/> It was the connections to the hold button itself that had come off.<br/> The wire in Geoff's picture goes up to the hold button. You'll see in the picture it goes through a cable retainer which, in my case, wasn't doing its job. <br/> In any case, you remove the centre...
- Sun Apr 07, 2019 10:13 pm
- Forum: Techie Stuff
- Topic: Hold function on auto box not working
- Replies: 4
- Views: 2338
Re: Hold function on auto box not working
Cheers Geoff.
Always helpful.
When I find the problem I'll post the answer
Always helpful.
When I find the problem I'll post the answer
- Sun Apr 07, 2019 6:06 pm
- Forum: Techie Stuff
- Topic: Hold function on auto box not working
- Replies: 4
- Views: 2338
Hold function on auto box not working
Hi. The Bongo is a Diesel, year 2000. I noticed today that when pressing the hold knob on the auto gear lever the hold light does not come on and the hold function does not work. Everything else is fine with the auto box changing when it should. I can live without the hold function but would sooner ...
- Wed Mar 27, 2019 7:25 pm
- Forum: Techie Stuff
- Topic: Radiator
- Replies: 9
- Views: 2756
Re: Radiator
I think you were not mislead, it probably should be on a vac to assist removal of gasses etc, but mine was just to atmosphere, no catch tank, and improved the breathing and cleanliness of the inlet manifold no end . Hide it from the mot man though, they don't like poss oil drips. Cheers for the rep...
- Wed Mar 27, 2019 11:34 am
- Forum: Techie Stuff
- Topic: Radiator
- Replies: 9
- Views: 2756
Re: Radiator
Check the crank case breather when hot, I removed mine from recirculation and vented it to an oil catch tank. Have the valve stem oil seals been done. We had this set up for a while and it helped throttle response a little too. However, and apologies for going off topic but I read the breather shou...
- Tue Mar 19, 2019 9:29 pm
- Forum: Bongo Chat
- Topic: Reasonable price to change rear springs?
- Replies: 6
- Views: 2338
Re: Reasonable price to change rear springs?
We had ours changed a couple of weeks back but can't say how much as had a couple of other things done too plus the mechanic had to work around the air lift. No change noticed handling wise.
- Tue Mar 19, 2019 9:21 pm
- Forum: Techie Stuff
- Topic: Tent frame screws and fastenings...
- Replies: 3
- Views: 1296
Re: Tent frame screws and fastenings...
When applying glass fibre resin to aluminium you glass paper the oxide off the aluminium and then you have about 45 minutes to put the resin on in order for it to adhere properly (or so I've read)
Guess the same is true for when you epoxy the aluminium insert's in.
Guess the same is true for when you epoxy the aluminium insert's in.
- Thu Mar 14, 2019 10:34 pm
- Forum: Campervan Conversions in Bongos
- Topic: ceiling hatch conversion
- Replies: 19
- Views: 11235
Re: ceiling hatch conversion
It's a lot of work but I put a second hatch in, just like the factory one but a little shorter. You need a second bedboard with the trapdoor for this. I paid £100 delivered for one off ebay. You have to turn the central light through 90° but construction is as per how the factory did theirs and is s...
- Tue Mar 12, 2019 5:59 pm
- Forum: Bongo Camping Equipment
- Topic: Quechua Air Seconds Awning
- Replies: 2
- Views: 3217
Re: Quechua Air Seconds Awning
No personal experience although I always eye them up when I see them. However, there's loads on this forum about them. You can find the info using the search function
- Tue Mar 12, 2019 9:44 am
- Forum: Off Message
- Topic: Is there a legal tyre age limit ?
- Replies: 12
- Views: 6034
Re: Is there a legal tyre age limit ?
Cheers Bob.
- Mon Mar 11, 2019 11:11 pm
- Forum: Off Message
- Topic: Is there a legal tyre age limit ?
- Replies: 12
- Views: 6034
Re: Is there a legal tyre age limit ?
Manufacturers are sometimes reluctant to tell you how old there tyres are. Presumably as you'd want a new one rather than a 2 year old one for example. Tyres are marked with loads of information. I'm sure the date of manufacture could be added. I guess they'd have to add this information if the law ...