having just been shouted at about using the wrong tomatoes for me packed lunch i think you are in a good place at least 2 more beeros. As a guess the red is the high speed the low speed is blue/red @150ohm It will be a while before i can get down and dirty. ask geoff if he's there? ( he'll know if h...

I thought about running it with 270ohm but had all ready reconnected and played about for 10 mins and couldn't separate again havent got 180 by the way. the red is a large diameter wire the blue red is smaller. my intention was to check someone else bongo for fan operation and as a supplement add le...

moving the bracket above makes the job easier. there is a clip at bottom of the connector to depress and pull. ------------aircon open 200ohm 150ohm red/blue 9.5v --11.8v ---2.6v -----11.6 red--------13v --11.9v ---11.8v ----3.4v aircon values engine running I couldn't tell speed of fan by noise

Thanks
now a monday job. sons motorbike tonight and next weekend, this is the normal fortnightly trip to mother in laws.
Tommorrow is probably prep time for weekend and andy's temp sensor set up. Yes I'll be working on a Bongo but not mine.
thanks again

the sensor is it just above the small hose coming out of the head towards the rear of the engine.
how does it fit, pull or twist.

clean the grime away and yes in a decent bit of light it is indeed red and black.
Thanks
your info will help no end.

97 4x4 fancy air con geofs diagram http://www.g8dhe.net/bwm/bwmanualp.htm?1997/Page_46 now detatched left hand plug ENGINE ON AIRCON ON OFF OFF OHMS red blue 9.5V 0V 0 red 13V 0V 0 black 0V 0 0 red brown 1.5V 0V 0 The displayed does not show as clear as the table hope it is understandable with the a...

So glad this thread is here, Used the ratchet method, sounds daunting but isn't really. The only problem i had was finding the right tool for the job (top fitting). I couldn't find a ratchet /socket thin enough to fit, in the end I used a deep cranked ring spanner. The nut and old fittings were 12mm...

The age of the vehicle isn't really relevant, it's the length of time the fuel is storred in the tank that counts: http://www.bp.com/content/dam/bp-country/en_au/products-services/fuels/opal-fuel/Opal-factsheet-storagehandling.pdf yes bob totally agree thats why original comment was related to mode...

Yes the bong oh is a modern vehicle in comparison to my petrol vehicles
my latest is a 87 750 gsx that does not like to be stood..
My lawnmower (B and S) also complains, but was designed in the roman era.
just realised my experience is with carbaretors
" what are they"?

leaving the electrical issues battery/ignition, you run mostly on LPG.
How old is the petrol/ how much in tank?
modern petrols do not like hanging around unused and may be difficult to start.
probably just another question and not part of this solution

My problem is not rust but the top lacquer is going in places the bonnet is worst with oxidised faded top coat.

Yes i did know about the clocking but with 198K on the clock doesn't sound clocked and even the Japanese oil service stickers tied in. Yes a back street dealership but when looking for mine I seen much more dodgey looking ones in London. But looked like simple import what you see is what you get. Ye...

Do fans cut in.
where do you measure volts when fans cut in?
1st speed
2nd speed

I got mine from 1st Birmingham motors They have quite a few new imports in and let them go for £5-8000 unconverted I also got mine NOV 2012 from 1st Birmingham motors just googling this i got (the guy i dealt with) About MR MOHAMMED UMAR FAROOQ Mr Mohammed Umar Farooq holds 2 appointments at 2 acti...