You can get a kit (made by Summit?) which consists of adhesive tube & a small piece of gauze material which is sandwiched between mirror bracket & glass. I used it a while back & had not problems since. Make sure both surfaces are thoughly cleaned (I think it may come with a spirit wipe for this ...

I know its not what you asked, but they are available from Bongobits:

http://www.bongobits.com/Main.asp?PageN ... Product=20

The front one sheared on mine. I think I went about 4 months before getting it fixed. Worth the extra expense to get all 8 studs/nuts & the gasket changed. Expect to pay about £28 for gasket & about £16 for studs/nuts. Labour is probably a couple of hours, depending on how well the rest come out.

I agree with Dandy - I am planning to use the speedo sensor feed, just before the km-mph convertor. Feeds from the coil are only used for rev counters & therefore are engine speed, not road speed. Most Bongos are diesel, so no coil anyway.

Tom, yes I intend to put together a fact sheet when I get it in & working.

Pippin, you are correct, I posted a question on the forum a while back regarding best place to get a vacuum take off, but it veared off-topic & I never got an answer. Perhaps someone with engine manual cd could have a look ...

I'm part way thru fitting a unit from Waeco & have one issue to solve. The actuator needs to be connected to the vacuum system & I have yet to confirm exactly which pipe to cut! It looks like there is a pump which does the power steering & I beleive the same unit feeds the brake servo. Hopefully, I ...