stuc wrote:Can you pump it up and down and adjust the ride height, if so how much can it go up and down.
The air ride I was looking at was £2000

From memory the compressor system fitted was approx £500, I may be wrong so don't quote me.......

Good addition to any bongo, easy diy job and my top tip would be to use WD40 for lubrication on fitting the air assisters into the springs.......

I had a small leak from mine but couldn't find it at first and then by chance I noticed a drip from a lower hose, after tightening all jubilee clips I never had the problem again.....

Bongoless too but might make a fleeting visit on me bike.....

Have a go, you'll surprise yourself DBO fitted mine with me looking on so would like to think I could fit these.
P.s get the chrome dial discs aswell as they really finnish it off
http://www.igmaynard.co.uk/bongo/forum/ ... asma+dials

http://www.amazon.co.uk/dp/B00409JIB4/r ... B00409JIB4

Here you go with free delivery....

Loving the red over silver

Lady Margarets Park Chirk, our all time favourite CC Site, we go at least three times a year

Colin H F wrote:apart from getting someone to drive behind or alongside you how do you obtain these figures Colin

Most sat nav's give you an accurate speed

Muz, another oatcake failure I'm afraid, third time lucky next time. :(
:( I'll just have to make do with the rather wussy North Staffordshire variety from Sainsbugs :(

There is someone planning to attend the meet on a kind of research mission prior to buying a Bongo and I had instructed them ...

I recently fitted HID lights to my motorbike and so just before my MOT was due I contacted the MOT station I use to ask if HID's would indeed fail the MOT, the answer I got was as long as they are at the right level's there would be no problem, new 12 month ticket issued with no advisories

We purchased ours from Phil a few years ago, first class vehicles he sells and although ours isn't converted the ones I've seen are top notch

OK, a cold pressure test. I've been messing with measuring dynamic pressure while running, so that's what distracted me.

1.5 psi over 5-10 minutes is measurable, but you've also introduced two new parts into the system, cap seal and gauge. Hard to say. There are UV additives that you could try ...

LB's are designed to go practically flat but with a good charge will be as good as new