Search found 65 matches
- Sat Jan 19, 2013 6:46 am
- Forum: Techie Stuff
- Topic: Is it possible to
- Replies: 8
- Views: 2365
Is it possible to
I am wondering if it is possible to connect the bleed off outlet pipe from the engine,to the header tank. I see there is a outlet/inlet on the left of the header tank which could be drilled thru. If I restricted the pipe flow surely this would not effect it too much but ensure there was no air in th...
- Wed Jul 06, 2011 6:48 pm
- Forum: Techie Stuff
- Topic: small vac pipes
- Replies: 3
- Views: 2011
Re: small vac pipes
its a 95 2.5td wlt
- Wed Jul 06, 2011 10:56 am
- Forum: Techie Stuff
- Topic: small vac pipes
- Replies: 3
- Views: 2011
small vac pipes
Hi all im not sure where my little vac pies are supposed to come from and go on the drivers side, I havea a vac pipe above the inj pump,and a solenoid switch with two pipes and on the pump there is a diaphram unit with two pipe conections.my question is what connects where and i have three points of...
- Tue Jul 05, 2011 8:21 am
- Forum: Techie Stuff
- Topic: alternator
- Replies: 4
- Views: 1611
alternator
does anyone know if the bongo alternator is fitted to any other vehicle,as i need one and i know i am going to pay big money when they know what its for
- Fri Jan 21, 2011 9:44 am
- Forum: International
- Topic: Finding Bongo parts in Australia/is it worth the hassle??
- Replies: 29
- Views: 25502
Re: Finding Bongo parts in Australia/is it worth the hassle?
i bought my brop links from ebay uk from somewhere in hong kong for £24.00 a pair delivered ,that was 9 months ago and they are still going strong as for the bushes any mazda mdealer can get them for the same price as they can be bought from the uk
- Sat Jan 08, 2011 9:49 am
- Forum: Techie Stuff
- Topic: juddering aft
- Replies: 21
- Views: 5309
Re: juddering aft
thanks for the many suggestions,i shall try the lithiun grease,however its not the cold causing the problem as its 28degrees here,and the pool is at 26,,,, sorry
- Mon Dec 20, 2010 11:12 am
- Forum: Techie Stuff
- Topic: juddering aft
- Replies: 21
- Views: 5309
Re: juddering aft
has any one got a diagram of the roof mech as i see there is nothing in the tech pages
- Mon Dec 20, 2010 11:00 am
- Forum: Techie Stuff
- Topic: juddering aft
- Replies: 21
- Views: 5309
juddering aft
My aft has started to judder on the way up and is reluctant to lock in the up position on the passenger side ,any ideas as to what causes this
- Sat Oct 24, 2009 7:07 pm
- Forum: Techie Stuff
- Topic: seatbelts
- Replies: 3
- Views: 1691
Re: seatbelts
good point about the lap belts ,however kids are too valuble for lap belts.no way by child will ever have just a lap belt
- Sat Oct 24, 2009 5:05 am
- Forum: Techie Stuff
- Topic: Air Lock? considering removing the stat....
- Replies: 52
- Views: 10325
Re: Air Lock? considering removing the stat....
if your bottom hose is not getting warm/hot the thermostat is not opening ,go get a new one genuine is best. toflush the rad properly you need to take it out and give it to a rad specialist who can clean out each of the rows. . Hot water is hheated up by the head and block and as the thermo opens (8...
- Tue Oct 20, 2009 8:00 am
- Forum: Techie Stuff
- Topic: checking tappet clearances
- Replies: 22
- Views: 5322
Re: checking tappet clearances
the old pump method for testing injectors is the hartridge pump you can measure the break off pressure(fuel pressure needed to be reached before the injector injects)and see the spray pattern.a injector is only a casing with a insert shaped like a top hat ,inside that is a shaft whos end comes to a ...
- Sun Oct 18, 2009 7:14 pm
- Forum: International
- Topic: Freda in NZ
- Replies: 18
- Views: 13829
Re: Freda in NZ
if you fancy a coffee give me a pm when you get here i live 30 mins from the mount
- Sun Oct 18, 2009 6:51 pm
- Forum: Techie Stuff
- Topic: checking tappet clearances
- Replies: 22
- Views: 5322
Re: checking tappet clearances
its about 8-10 10mm head bolts and 2 12mm for the hand brake and 2x12mm for the gear shift and just lift the cover away. the tappets are easy just remember 3 valves per cylinder inlet 0.1mm exhaust 0.2mm the knocking noise could aslo be an injector whos spray pattern has gone from a mist to a squrt,...
- Sat Oct 17, 2009 6:49 am
- Forum: Techie Stuff
- Topic: Remote Central Locking Question
- Replies: 4
- Views: 1637
Re: Remote Central Locking Question
the best i can do is describe mine that i fitted.My actuator had two wires so i used the wiring for a two wire actuator that was shown in the reciever diagram.as to the switching it was trial and error i tries each scenario until it worked and then made sure it locked and unlocked correctly.If i rem...
- Tue Oct 13, 2009 7:06 am
- Forum: Techie Stuff
- Topic: what is this pipe
- Replies: 1
- Views: 1208
what is this pipe
i have a metal pipe @4mm which comes from the front and is secured by one of the inlet manifold bolts(second one along under neath) and conected somewhere to a vaccuum supply.My egr is gone and there is no pipe on the end of this one .Where should it connect