All sorted...Loose contacts in the switchy thing under the Bonnet!! Easy solder repair and back up and running...thanks to all those who posted with help!!Thanks..

Heres the problems of the switch..

Hi Dave!! Thanks soo much for the pictures and extensive info!!! Im pretty confident it will only be the resistor pack or a fuse as i took out the fan when it was rusted about 3 months ago (the vehicle hasnt moved since then lol) only used the fan a couple of times... A auto electrical mate at work ...

Interesting posts guys thank you!! I have no problem taking out of park or running trhought from park to drive or any other gear, it just wont start sometimes... Maybe the starter solenoid contacts or the gearbox switch could be the go!!!
Are the gearbox switch and the starter solenoid contacts ...

It would be awsome if you guys could post some pics of the control unit and the resistor pack,at least then ill have an idea that im looking in the right place??? Have a starting issue as in one of my other posts!! All seem to come at once hey..
Great when your trying to sell a conversion!!haha ...

Hi all...Im sure these questions have been covered,but ive tried one thing now its confusing!!!

My FRONT fan didnt work on 3 and 4 setting(Manual type system) Motor was running slow compared to the the other bongo heater motors ive had...The motor seized..I stripped it down and changed the ...

Hi all.. it seems the bongo sometimes will not start, except when you put the foot on the brake and run through from park to drive and back to park, then it will start!!! :roll:

From what i can gather through auto sparky mates could be a switch on the gearbox somewhere,that may need cleaning or ...

Yep thats what my wishbone diameter is =27mm.. Hence im sure my wishbone is stadard of 27mm..
They must have sent the wrong ones as im sure speaking to a few vehicle builders at work recon even if they were pressed in
they would have been closer to 26mm diameter and pressed in maybe but 20mm that ...

Hi lazy. Yep defo right bushes got them
On eBay and said they are front bushes.
Northern bungalow is your wishbone arm
27mm diameter and the ones you bought
We're 27mm diameter holes in the bush?

Hi all. Just received today my lower inner wishbone
Bushes (55mm outer diameter)and I'm just wondering if they should be
Pressed in because the shaft diameter is 27mm and the bushes
I have have a 20mm diameter. :evil:
Are these wrong? I'm thinking of turning them down
On the lathe at work to 27mm ...

Cheers simon ill give those guys a call!!

Hi all..No look finding a Alternator regulator for my bongo SGL5 4x4 ... no one in the whole world seems to have one for sale!! :roll: :roll:

Im looking a tthis one and just wondering if you guys think this one will fit o.k?? im not bothered that its a 80 amp as the auto sparky at work recons its ...

I took a look at the youtube bongo fury coolant procedure... they mention keep topping up the coolant as its being bled(at the engine bay area bleed pipe) but they dont mention wether if the coolant will over flow at all in the expension tank when hot!!

I left my expansion tank cap off whilst ...

HOLD on, we may have a break through!! So the actual regulator codes are L190G6340??????????????
i may need to contact again the suppliers here for another go on the rectifier then??
Last chnace senario is to buy a new alternator i guess..

So in Laymans terms a cold pressure test he used is unreliable when using a pressure gauge on the coolant expansion tank???
No visable signs of leaks anywhere..

UV additives will have to ask around there but dont fancy my chances.. Carnt even get front brake discs or front rear lower wishbone ...

Update... Alterenator is off the car. A work collegue (suto sparky) said brushes are o.k, good be just a bad earth originally, but sugests to chang ethe Regulator to be safe. my local electrical suppliers cannot find a listing for japanese hitachi LR190-731 regulators..
:evil: :evil:
Most of the ...