Hi all, thank you for your comments. I believe it was the soleniod seal that had dropped, as teenmal said. Removed soleniod, cranked engine over and could see fuel getting through.

Chucked positive and neg connectors to soleniod to see it work. Put it all together and she goes! Great feeling ...

Hi Geoff,

Thanks for the reply. I get 12v to the solenoid, after removing the rubber I can feel it move when I put the ignition on.

Topped it up with 2more gallons of diesel and cranked and cranked it, just not a drop is coming out of the injector pipes.

Battery back on charge (new battery too)

Hi all,

I've put my bongo back together after replacing the head. I'm struggling to get fuel to the injectors. I've slakened the furthest on the right cap on injector, to see if I get fuel coming out when cranking.

1. I've changd the fuel filter, filled it with diesel, tightened it all and sucked ...

Spacer ? Not sure what you mean, the individual sockets don't have names as such and new replacements aren't available either, the pins are held in by a Barb inside which needs to be released, normally by using a thin pin inserted from the front of the connector this pushes the barb up and the ...

Hey, thank you for the reply.

I tried taking the spacer out, but with no luck. Was hoping to find a replacement plug and just snip and resolder. Proving difficult to source as I don't know correct name or any reference to what it is or does

I'll have another go at getting the spacer out

Hey all,

I snapped the wire off this connector, could someone help me identify what it is so I can source one from a breakers

Part of the hub of connectors that go to the fuel pump

Mazda bongo connector what is it? https://imgur.com/gallery/FdpvKxc

Kind regards

Dave

Hi guys,

I'm installing my injectors after they've been serviced. Could someone tel me if this is correct?

Diesel injector mazda bongo https://imgur.com/gallery/uop67bo

Also does the crush washer go on flat side to nozzle? Like this

Diesel injector crush washer mazda bongo https://imgur.com ...

Hi all,

Been a lurker on the site for a bit, some great information and community you've got here.

I bought a bongo last year as a long term project (over heating) I've changed radiator, waterpump, thermostat, water pipes and now the cylinder head. As Ive been doing this every other weekend, ive ...