Interesting, not read about a third seal... Hi there K8, sorry to jump in on your post but we have had the same with our recent purchase, so far we have replaced the 2 seals which stopped the fuel leak but the fuel was still dropping back, then I read about leaving the fuel cap unscrewed to prove ...

I have been out and had a look at the glow plugs, they are working as they should, so this further confirms my suspicion of air getting in to the fuel system as its OK starting down when facing downhill.

When checking the fuel system there seems to be no serious leaks apart from the dome cover ...

thanks for that info, I have has a quick search on here and seen the issue others are having. I will have a look at the fuel pump tomorrow as see if there are any obvious leaks around the dome caps on the fuel pump.I would imagine that if air is getting in fuel is getting out! I cant say I have ...

Hello,

my bongo has started to cause an issue when trying to start for the first time after being left overnight.

our drive is steep and when facing uphill the starter is having to do a lot of work (3 or so 20 second cranks) to fire into life. and runs rough for a bit. if the van is facing down ...

I have been converting my 97 Bongo for a few months now and have done all the work inside required by the DVLA to change it to a Motor Caravan, I have just had the logbook back and need to inform the insurance, at the same time I will need to increase the current value of the vehicle, I have looked ...

I need to replace the tyres on the alloys and they will be ok. Will the Alloys be up to the job?

How do I know the rating a a mazda 6 alloy?

is the load rating just the tyres that are fitted as i will need to replace the tyres on these alloys anyway?

okay this is a mine field, ive now found some Mazda 6 but seen some people to stay away because of the load rating. is any one out there using Mazda 6 wheels???

Thank you for the info's, I did see that previous post but didn't know how to find the size of the juke alloys, I have now found out they PCI and offset are OK but the center hole is 1mm out, will this mean they wont fit at all or will they squeeze on?

My bongo has got old steelies fitted with poor tyres it's due a MOT and after buying a set of alloys with road legal tyres on. I've been offered some Nissan Juke alloys and don't know ho
w to check if they fit. Any one tyred to fit this type or know how I can find out?

I am mostly after a remote central locking upgrade with an immobilizer, looks like I would need a remote central locking upgraded and then a Thatcham Cat 2 that has transponder of some kind? so looks like I would be better with a Cat 1 alarm system, can anyone recommend a system that doesn’t keep ...

Hello All,

i am looking at doing a mid conversion and stuck on what size rock and roll bed to install, most 3/4 beds out there are about 1080mm wide but that looks like its not got a lot of room left for the kitchen. looks like a 950cm width would be more like the right size. has any one fitted the ...