Yep. Got it! That was a great help thanks. I can see that it is not quite being reached, mainly because the tapes on the 'tent' are stretched to the limit. I will find a way round it now. Thanks again.

There are 4 limit switches that control position of the AFT.
Two at the front (top) which both have to operate to signal the computer that it is safely down and the front runners are under the "hoods"
One in the middle, that controls the stop on the way down when you check the inside.
one at the ...

Just an additional question now about tha AFT. Does anyone know where the roof UP microswitch is situated. I have found the roof down switch but need to find the roof up switch as the beeper is not switching off, so the signal from the up switch is not getting through. Thanks.

One or two people in the past have managed to get it working sufficiently to get at the motors and clean them up, by operating the up/down button lots of times, each time the motor rotates a little to and fro and eventually freed up sufficiently to let the roof rise. Worth trying as its a cheap and ...

Roof wont raise, caused no doubt by the fact that it hasn't been used for 8 months. (Other owners note that its probably a good idea to raise the roof every month or so just to maintain the mechanism.
So here is what I have done so far. Handbrake light lit so that switch is working OK.
Beeping ...

Re my previous post w.r.t. bongo headlights being on spontaneously. Turned out the insides of the relays were rusted seriously, so tracking was taking place from live feed to relay coils, particularly when weather conditions were humid, (the copper salts in evidence being hygroscopic), and :D that ...

Before I set about tracing out the wiring, I thought I would just ask if any one else came across this bongo fault.
Noticed one evening that the bongo head lights were on when I hadn't used it that day. Sure enough, the headlight switch was off. As it was not a convenient time to start repairs, I ...