Thanks again to all who have shown an interest and taken time out to furnish me with some more technical data, thanks to Rita for the injector break-offs, the upper and lower limits equate to 123.385 and 116.247 atmospheres technical respectively, so the "educated guess" of 125 wasn't a million ...

Thanks all for your help, the bores have honed up ok so standard 93 mm pistons going back in , the big ends are standard to so just new big end shells and piston rings, I,'ve stripped and cleaned the oil pump as the head has cracked and it has passed a little water down passed the rings and through ...

Hi again to all, would any helpful soul have the torque settings for a complete engine rebuild on a 1995 2.5 turbo diesel please, I've come across the settings for the head but as its a high miler I,m going to put new piston rings and big end bearings in, I've already honed the bores and ordered the ...

Hi Bob, thanks for your reply, I have read something about the performance of bleeding the cooling system lol, I bought the bongo last week as a non runner, took the glow plugs out and turned her over and a small ( very small) amount of coolant was ejected from number two, I,m gonna whip the head ...

Hi everyone, question from a newbie, I,'ve just bought our first ever bongo, a "dead one at that" (cylinder head cracked) I,m gonna fit a brand new head along with new pistons , big ends and mains. My question is :- as I,'ve taken the injectors out to fit to the new head I may as well reset and ...