Hi all
Well we've bought our rear conversion today and now I need it fitted !!! :-(
It comes with a Smev three burner hob and sink unit and a Indel B compressor chest fridge.
We don't have a leisure battery fitted at the moment and I want to run from the hook up point, does come with the consumer ...
Search found 9 matches
- Tue Mar 25, 2014 11:29 pm
- Forum: Campervan Conversions in Bongos
- Topic: Rear kitchen conversion
- Replies: 3
- Views: 2319
- Fri Nov 22, 2013 10:43 pm
- Forum: Pimp My Bongo
- Topic: Our Bongo Aero 2.5v6
- Replies: 3
- Views: 2456
Re: Our Bongo Aero 2.5v6
Thanks both.
Well we've had our Bongo a few months now and we find it great !!!
We went for a tin top to enable us to put her into the carport when not being used and to keep the winter weather off.
Yes it is not the most frugal car/bus/van , camper around but it is very smooth, quiet and relaxed ...
Well we've had our Bongo a few months now and we find it great !!!
We went for a tin top to enable us to put her into the carport when not being used and to keep the winter weather off.
Yes it is not the most frugal car/bus/van , camper around but it is very smooth, quiet and relaxed ...
- Tue Oct 15, 2013 6:18 pm
- Forum: Techie Stuff
- Topic: OBD scanners
- Replies: 27
- Views: 8424
Re: OBD scanners
Hi all
Well thanks for the info on the reader !!
I've checked ours and it does have the adapter but not the OBD shape.
Our Bongo is a 2001 V6 so it looks like that those interface cables 17 to 16 are no good and the ELM cable is the way to go !
Any ideas where you can get these cables from ...
Well thanks for the info on the reader !!
I've checked ours and it does have the adapter but not the OBD shape.
Our Bongo is a 2001 V6 so it looks like that those interface cables 17 to 16 are no good and the ELM cable is the way to go !
Any ideas where you can get these cables from ...
- Fri Oct 11, 2013 10:26 pm
- Forum: Techie Stuff
- Topic: OBD scanners
- Replies: 27
- Views: 8424
OBD scanners
Hi all,
Just out of interest I've been looking at OBD fault code scanners ( I need one for our MX5 ) and thought it would come in handy to check our new Bongo but I notice that is a different port 17 pin and not the 16 pin like on most cars.
I see you can buy a interface cable to enable the ...
Just out of interest I've been looking at OBD fault code scanners ( I need one for our MX5 ) and thought it would come in handy to check our new Bongo but I notice that is a different port 17 pin and not the 16 pin like on most cars.
I see you can buy a interface cable to enable the ...
- Tue Oct 01, 2013 8:36 pm
- Forum: Campsites
- Topic: Blossom Park Abergavenny
- Replies: 2
- Views: 2132
Blossom Park Abergavenny
hi all,
well being newbies we went to Blossom Park Abergavenny last weekend which was our first trip out in our Bongo !!!
After putting up the awning I bought from a fellow member on here which is great ( Royal Traveller ) Minus instructions !!! :-)
and a few swear words thrown in we had a great ...
well being newbies we went to Blossom Park Abergavenny last weekend which was our first trip out in our Bongo !!!
After putting up the awning I bought from a fellow member on here which is great ( Royal Traveller ) Minus instructions !!! :-)
and a few swear words thrown in we had a great ...
- Fri Sep 13, 2013 9:30 am
- Forum: Pimp My Bongo
- Topic: Mazda alloy wheels
- Replies: 5
- Views: 3345
Re: Mazda alloy wheels
Just looked back a bit and found;
"BTW I did a little research into weight bearing since I know that there could be concern over using car wheels on a van....
Vehicle Kerb Weight (Kg): Gross Weight (Kg)
Bongo 4wd 1700: 2260
Mazda 6 saloon 1485: 2010
Mazda 6 estate 1575: 2145
Mazdza RX8 1430 ...
"BTW I did a little research into weight bearing since I know that there could be concern over using car wheels on a van....
Vehicle Kerb Weight (Kg): Gross Weight (Kg)
Bongo 4wd 1700: 2260
Mazda 6 saloon 1485: 2010
Mazda 6 estate 1575: 2145
Mazdza RX8 1430 ...
- Thu Sep 12, 2013 9:53 pm
- Forum: Pimp My Bongo
- Topic: Mazda alloy wheels
- Replies: 5
- Views: 3345
Re: Mazda alloy wheels
You will need to check the offset i.e. the relative positions of the centre of the tyre and the fixing point
Wow that was quick..
I've found this info.
http://i484.photobucket.com/albums/rr201/jeff1472/info.png
Still not sure but I do know that MX5 Mk3 owners put RX8 18" alloys on their car with ...
Wow that was quick..
I've found this info.
http://i484.photobucket.com/albums/rr201/jeff1472/info.png
Still not sure but I do know that MX5 Mk3 owners put RX8 18" alloys on their car with ...
- Thu Sep 12, 2013 9:30 pm
- Forum: Pimp My Bongo
- Topic: Mazda alloy wheels
- Replies: 5
- Views: 3345
Mazda alloy wheels
hi there,
can anyone tell me if these wheels are ok to use on our Bongo aero? they are off a Mazda MK3 MX5 16x6.5 I cannot find any info of the wheel load but I think the tyres were 87w.
http://i484.photobucket.com/albums/rr201/jeff1472/KGrHqVqsFIdM5J4gBSMJRHfNUw60_12-1.jpg
I can buy right tyres ...
can anyone tell me if these wheels are ok to use on our Bongo aero? they are off a Mazda MK3 MX5 16x6.5 I cannot find any info of the wheel load but I think the tyres were 87w.
http://i484.photobucket.com/albums/rr201/jeff1472/KGrHqVqsFIdM5J4gBSMJRHfNUw60_12-1.jpg
I can buy right tyres ...
- Fri Aug 30, 2013 10:38 pm
- Forum: Pimp My Bongo
- Topic: Our Bongo Aero 2.5v6
- Replies: 3
- Views: 2456