EGR Blanking
Moderators: Doone, westonwarrior
-
- Apprentice Bongonaut
- Posts: 6
- Joined: Thu Oct 22, 2020 11:04 am
Re: EGR Blanking
Is there any chance you have a dxf file you can share for the egr blanking plates. I’m in New Zealand and have access to a laser cutter.
Re: EGR Blanking
I guess you could make a pattern with some thick paper and a crayon?
Re: EGR Blanking
There is a gasket between the EGR joint. You could draw around it.
Allans now closed. In Plymouth, use PGS (Plymouth Garage Services) or Mayflower Auto Services
-
- Apprentice Bongonaut
- Posts: 6
- Joined: Thu Oct 22, 2020 11:04 am
Re: EGR Blanking
Yeah that’s plan B. Was just being a bit lazy
Re: EGR Blanking
Hi Robrobhho123 wrote: ↑Thu Sep 10, 2020 10:58 am Hi All
After reading on here about EGR blanking and speaking to my dad that used to blank them off on race cars as it's loss of power etc and really not
needed but obviously has to be done for emissions wise. I have opted to Blank it off to stop all the gunk getting into the inlet to hopefully prevent any issues later down the line. So my plan is to take the pipe of this weekend and draw up the blanks then cnc machine them, My question is does anyone want any at the same time as I might as well make a few at the same time.
Rob
Do you have any blankig plates made up & looking for a new home?