Zig CF9 Panel Cover

Questions & answers about kitchen units, stoves, fridges, heaters, water tanks, seats, mattresses etc etc.

Moderator: Doone

Post Reply
iansimpson888
Apprentice Bongonaut
Posts: 5
Joined: Thu Jul 24, 2014 3:05 pm
Location: Lancashire
Contact:

Zig CF9 Panel Cover

Post by iansimpson888 » Mon Apr 24, 2017 3:22 pm

Hi there, does anybody have a solution for my problem? My Bongo has been coverted and has a Zig CF9 Panel fitted, however it in near to the rear seats and quite often the kids accidentaly lean on the buttons; likewise when the rock and roll bed is in place the switches are easily knocked in the night. Does anybody have a cover / hgood type thing for the panel to prevent this (plus the mask the glow from the led indicator lights in the night!!!!) Thanks!!!!
Gasy
Supreme Being
Posts: 2123
Joined: Thu Apr 11, 2013 5:49 pm
Location: Peterborough

Re: Zig CF9 Panel Cover

Post by Gasy » Mon Apr 24, 2017 4:20 pm

Never seen one with a cover
Think you might have to fettle something up
Long screws , spacers and a small sheet of clear plastic
Or a bit of cornflake box and some Gaffa tape :D
Gas safe heating engineer / plumber if you need any advice just shout.
User avatar
Doone
Supreme Being
Posts: 2839
Joined: Sun Jul 04, 2004 10:58 am
Location: Devon
Contact:

Re: Zig CF9 Panel Cover

Post by Doone » Mon Apr 24, 2017 5:39 pm

Or an empty plastic container gently wedged over the unit?
Allan's closed. We recommend PGS (Plymouth Garage Services) or Mayflower Auto Services in Plymouth.
iansimpson888
Apprentice Bongonaut
Posts: 5
Joined: Thu Jul 24, 2014 3:05 pm
Location: Lancashire
Contact:

Re: Zig CF9 Panel Cover

Post by iansimpson888 » Tue Apr 25, 2017 7:49 am

thanks guys, guess I'd better get fettling!!!!
Post Reply

Return to “Campervan Conversions in Bongos”