interior lights
Moderators: Doone, westonwarrior
-
- Bongonaut
- Posts: 34
- Joined: Fri Jul 06, 2012 10:44 am
- Location: SALISBURY WILTSHIRE
interior lights
Hi, i have recently removed my original kitchen pod and lesiure battery uncliped all the electrics and unbolted the metal framing ect,but need to know how to wire up the interior lighting as i now have no lights in the rear of van as they were connected to this any help would be appreicated many thanks
- g8dhe
- Supreme Being
- Posts: 10217
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: interior lights
The standard wiring for the interior lights is shown here;
The Galley wiring doesn't appear to interact with the main vehicle lighting, however there is a switch that operates the "Pillar" light, this maybe the rear nearside one perhaps;
If so then it should just be a case of putting the connectors back to the original state as in the first diagram, the module T3-20 in the Galley unit is possibly the culprit, but not physically played with a Gally previously to be certain.
The Galley wiring doesn't appear to interact with the main vehicle lighting, however there is a switch that operates the "Pillar" light, this maybe the rear nearside one perhaps;
If so then it should just be a case of putting the connectors back to the original state as in the first diagram, the module T3-20 in the Galley unit is possibly the culprit, but not physically played with a Gally previously to be certain.
-
- Bongonaut
- Posts: 34
- Joined: Fri Jul 06, 2012 10:44 am
- Location: SALISBURY WILTSHIRE
Re: interior lights
Many thanks I look later this weekend
-
- Bongonaut
- Posts: 34
- Joined: Fri Jul 06, 2012 10:44 am
- Location: SALISBURY WILTSHIRE
Re: interior lights
All done thank you very much just waiting for full conversion to finish now thanks for all advice