Hi All,
Being a complete novice ( 1st bongo trip planned for easter weekend) I was just curious about the mains hookup process - once connected to the mains power does the power source default to the mains hookup as I am concerned that the power may be sourced from either the leisure battery or even worse the engine battery. Is there something like a switch or something that ensures the power is received from the mains & not the battery.
Mains Hookup
-
- Apprentice Bongonaut
- Posts: 3
- Joined: Wed Jan 04, 2017 1:12 pm
Mains Hookup
With Kind Regards
Phil
Phil
- g8dhe
- Supreme Being
- Posts: 10219
- Joined: Sun Apr 13, 2008 10:06 pm
- Location: Worthing, West Sussex.
- Contact:
Re: Mains Hookup
All installations can vary, but the most common option is that the;
Two 13Amp mains sockets will be directly powered from the EHU,
there may also be a 12 volt charger that will run the conversion and very often charge a battery - possible selected by a switch on the control panel.
You really need to let us know what the system installed is Zig version, PMS3 or CBE systems are the most common, a picture helps a lot!
Two 13Amp mains sockets will be directly powered from the EHU,
there may also be a 12 volt charger that will run the conversion and very often charge a battery - possible selected by a switch on the control panel.
You really need to let us know what the system installed is Zig version, PMS3 or CBE systems are the most common, a picture helps a lot!
-
- Apprentice Bongonaut
- Posts: 3
- Joined: Wed Jan 04, 2017 1:12 pm