Why Not Put a Rack On The Roof And Carry 4 full Size Just In Case 3 get Punctured. And You are more than 500 miles from an RAC Van.
OTT i Think

Hi Anna
After a reight good wetting at the scottish bash looks like we will be up for it. How about a mass run to SkegVegas on Saturday
how do we go about paymet#nt

John & Sue

Some More Pics http://picbite.com/gallery/43035fmcjk/ Its in paint at the moment so more pics soon. Had the arches made by a local metelwork company after giving them a template and profile of sills if its all a sucsess they may produce them soon sills in 1metre lengths The made em of 1mm steel so s...

Hope This Helps So It Dont Get To Bad Taken from my 1995 SGL5 before extensive welding and rear arch replacement. I know ist a known problem but the undeseal covered it up and didnt help link here for Pics from above exhaust and crossmember ends also inside of rear o/side wheel arch http://picbite....

THANKS FOR ALL YOUR HELP ONCE AGAIN [-o< GAVE THE WEIGHTS TO VREDESTEIN ALONG WITH THE TYRE SIZE COMTRAC WINTER 215/70/R15 C109/107 R MUD & SNOW ALL ROUND THEY CAME BACK WITH 4.5 BAR / 65 PSI BUT THEY LOOK GOOD ON 15" ALLOYS AND GIVE YOU 9MM OF TREAD AND GOOD GRIP IN THE SHIT. AND THEY ARE ...

Hi Got Mine Made At MIJ PERFORMANCE.COM A Year Ago Made To Measure While I Waited Brilliant Job By A Great Bunch Of Guys. If The Are Now Selling One Made Ring Them It Should Fit Perfectly The Hardest Bit Will Be Getting Yours Off From That First Flange. Or Just Go And Have A Day Out As They Make It ...

Hi Bongoliers

Does Anyone Know The front And rear Axle weights for a
2.5TD 4wd Auto Freetop.

as Once I Have thease I Can Get My Correct Tyre Pressures From Vredstien.

Thanks

John

UPDATE

If You Realy Want H/Duty Type 249 is heavier than 072 and is 90 AH
ChecK the length I Have One On Mine

John

Type 069 or the heavy duty version 072 will do the job
as fitter to some landrovers.

Hope This Helps

john

:lol: =D> Bongoliers As The Switch Had Been Replaced , And The Fault Was Still There With It Disconnected It Had To Be a Wiring Fault. The Brown With With A White Tracer Cable Coming From The Pressure Switch Was Cut At The Switch End And Where It Goes In To The Smaller Plug Of The 2 That Plug Into T...

Help Bongoliers My Oil Light Is Flickering very dimly below a 1000 rpm. First Thougt faulty pressure switch fitted new switch still the same. Even with wire (brown/white) disconected at plug near alternator still the same. Before i start opening up the loom to see if it is chafed through any Ideas C...

After removing the head shield and a closer look in daylight. You the wise ones are right low and behold top half of number one stud missing in action. No leak when cold and only slight when hot. Will have to be done but is it an urgent job ? as i only get sound for 1/2 mile. Is It best to renew gas...

thanks for your feedback i will check agiain.

watch the space

john

Help Fellow bongoliers.. After reading the forum for hours and learning a hell of a lot i need your help. My dear bongo makes a noise like a squealing / slipping belt for about 1/2 mile from setting off then everything is back to normal. This very rarely happens from cold but always when warm and pa...