Mine came off with a heat gun set on low or try using a hair dryer if your not brave. They peel off fairly easy and you can use surgical spirit/petrol to wipe down after.

Foz.Foz wrote:Hand brake on ?? in park?? Can't remember the times I'd forgot to do these.

That should read

Hand brake on ?? in park??

That will teach me to copy and paste things.... (sorry)

Only time mine did that was when I traded it in . A bit of a shove and it worked.

Hand brake on ?? in park?? Can't remember the times I'd forgot to do these.

Here's how I did mine....

http://www.igmaynard.co.uk/bongo/forum/ ... ks+foz.foz

Try dropping them in coke over night?

Well, my new alloys turned up today (wolfrace trenta). Got to give them a coating of Mer tonight then off to the garage (selecta tyres) to get them balanced and fitted. In case anyone wanted to know where they were from..... HERE

Thanks for help and PM's

Foz

Cheers Tribal. They are very similar as to what mine look like, but at that price....
Not sure about the nut spacings? Is that the PCD you mention? What is it for the Bongo? Any ideas

Hi Foz.Foz, The size of the wheel will be the same as the tyre ie 15/16/17 inch etc. If you post a picture of the alloys,someone might be able to tell you the make/type etc. Cheers. Cheers rita. I know its a 17" Wolf????? something or other but that's all I know. Bit dark for pics at the mo

Hi all. I was lucky enough to slide into a kerb over the Christmas Hols at about 5 mph on the ice. After taking the van to have it's tracking/wheel balancing done, it turns out that the two passenger side alloy wheels have now been bent a bit. A lot, as it turns out, and now anything speed wise over...

Well, after a bit of an easy start with the near side (passenger) front drop links and Anti-roll bar bush, the drivers side ones were a complete B!£(H to do. I ended up having to grind off one of the nuts as it had rounded off. Anyways... here's a few pics of the front arb's and drop link renewal. H...

Just got my hands on one

just started the second one and the nut has rounded .
Any suggestions??

Thanks...Foz

Cheers.... just got the first one on now. :D Nut came undone with out any problem. Lucky enough, I've just logged on in time to see the bit about tightening the nuts when it's on the floor. Guess I should fit the front arb's while the van is on the jack?? Foz E2a... what the score with fitting the r...

Hi all.
I have looked around for a guide on fitting drop links and anti-roll bushes for the front and rear of the van, but couldn't find one. Has anybody got one, or can they advise on the best plan of attack?

Thanks... Foz

Had a similar problem with mine the other month. Turns out that the split charge relay had got water in it and had rusted solid. Ordered a new one from Raw Components and it's all working again