Just to let you know my sliding door now works,,,, it turned out to be the switch in the door at the end of the cable on the door motor,, the last thing I tried,, hope this helps someone in the future,, Im now an expert on bongo sliding soft close doors,,, ha ha,,
Thanks for your help, Stancoppo

when you say one relay will pulse, which one would thet be?

Ok Thankyou, I will let you know how I go , your advice is excellent. Stan

just noticed the two contacts in the middle, (the ones that dont move), that supply the lock in the for,, im getting nothing from the, also there is a large loom in the passenger footwell step, that goes through and underneath the chassis, there is a wire that feeds the power supply in the post to t...

I already have the door panel off,, but i did unscrew the contacts and brought them together by hand all still connected,, but nothing is coming through,, i dont think there is voltage to the door on the lock or soft close,, but they work when i put a 12 volt signal to them with a battery and door o...

I was thinking that the contacts may be the problem, I dont know how to check when the door is closed though, maybe i I can unscrew them from the b pillar and door and touch them together somehow, I'm getting readings from the B pillar contacts and I know there is a 12 volt supply to the wires at th...

Hi all,, I have a problem with my Mazda Bongo camper sliding door electrics, the soft close does not operate and the electric lock on same, I have checked the celanoids on the lock and the soft close mechanism and they all work, they just dont work when I close the door, have also changed the power ...